Aztec Maxi

Q. The heating is working but I have no hot water.

A. Check the in built timer for hot water has been activated and the three On/Off periods have been set along with the tank target temperature.
Please page 7 of the Installation and operating instructions.

Q. The hot water is working but I have no heating.

A. Check the Red Power Symbol is illuminated on the boiler display, Press the On/Off button to illuminate the Red Power Symbol.
Check the external controls are calling for heat, TC should be illuminated on the boiler display next to the Red Power Symbol.

Q. The Power symbol and TC are illuminated, the boiler will not produce heat.

A. Check the target temperature is higher than the actual temperature.
Adjust the hysteresis to a lower setting to activate the boiler. See the Installation and operating instructions for more details.

Q. The touch screen is not responding.

A. Make sure the screen has not been locked. Press and hold the Confirm button for 5 seconds to lock or unlock the screen.
Isolate the power supply to the boiler for 30 seconds. Re-introduce the power and check the screen for correct operation.

Q. The boiler display shows F6.

A. F6 indicates insufficient water flow around the heating system. Usually due to air in the system or a poorly designed heating system.
Check to make sure the system has an auto by-pass valve. Contact your installer if unsure.